President
Dr Jezdimir Knezevic, is a world class researcher, educator and entrepreneur. Over 300 publications disseminated world-wide through books, papers, monographs and reports are attributed to his name. In addition, he has delivered numerous technical presentations, key note addresses and speeches; has been congress, conference, symposium chairman, track leader, workshop presenter, round table moderator on many hundreds international events which took part in all six continents in over 40 countries. He has been elected as a Fellow, Member or Official of many leading Professional Societies and Institutions worldwide, and has been actively involved in editorial work with the world’s leading and prestigious referred journals and publishing houses. Dr Knezevic has received several international awards for his contribution to research and education in the field of Logistics Engineering including the prestigious Armitage Medal (1993) and Eccles Medal ("In recognition of his outstanding achievements in the development of Logistics Education", 1996) from the Society of Logistics Engineers, SOLE, in USA
Encouraged by the excellent response from industry to his research and educational activities, in 1988 Dr Knezevic established a self-financing Centre for Management of Industrial Reliability, Cost and Effectiveness, MIRCE, at Exeter University, UK. Together with his colleagues, he has developed and delivered over 100 vocational courses and 12 international summer schools for practitioners from industry. Under his leadership, the Centre has attracted over 3000 professional engineers and managers and generated an income in excess of 3 million US dollars.
In 1991, Dr Knezevic developed and introduced the first Master of Science Degree in Logistics Engineering in the United Kingdom, at Exeter University. This was followed by the first Master Programme in Reliability and Maintainability Engineering, in 1996, and finally, in 1997 the first Master Programme in System Operational Effectiveness. Through these programmes he has directed and supervised over 150 postgraduate students, holding senior positions in leading global giants including Lockheed Martin, Rolls Royce, British Aerospace, Thomson Training & Simulation, GKN Westland Helicopters, Short Brothers, Martin- Baker, RACAL, United Defense, Kongsberg Defense, Alvis Vehicles (GKN Defence), EDS, Siemens Plessey, Lucas, Chelton Electro-Statics, Royal Air Force, NAMSA, South African Navy, Vickers, GEC Marconi, British Army, Yarrow Shipbuilders, Taiwan Air Force, Royal Norwegian Air Force, University of Singapore, Sentient Systems, Vickers Shipbuilding and Engineering.
In 1999 Dr Knezevic formulated the concept of the Mirce Mechanics, the science of the motion of functionability phenomena through the life of a system. To fully focus on the further development, application, dissemination and recognition of the Mirce Mechanics, he left Exeter University to establish the MIRCE Akademy, at the Woodbury Park, Exeter, UK. Under his leadership, the Akademy has educated large number of professional students coming from Industry, Government and Military Organisations world-wide. Over twenty of them completed the full Mater Programme received internationally recognised Master Diploma. Over 100 professionals, from all continents, were recognised by the Akademy for their practical achievements and awarded the Fellowship of the Akademy.
Dr Knezevic regularly provides services to private and public sector organisations regarding their short and long term reliability, logistics, maintenance, system engineering, cost and effectiveness needs.
Dr Knezevic holds Bachelor, Master and Doctoral degree from the University of Belgrade, Yugoslavia. He shares life with Lynn, is passionate about motorsport, is challenged by rusty, but beautiful Lancia cars, and enjoys a thatched house in tranquil Devon, England.
Contact: phone: +44 (0)1395 232 653, fax: +44 (0)1395 233 899 email: jk@mirceakademy.com
- Teaching initiatives implemented at Exeter University and MIRCE Akademy
- Undergraduate courses at Exeter University:
- Postgraduate Courses at other educational institutions:
- Master of Science Courses run by the MIRCE Centre at Exeter University:
- Continuing Education Courses run for Industry from Exeter University
- Industrial Summer Schools
Teaching initiatives implemented at Exeter University and MIRCE Akademy
2002: Created and implemented The Doctoral Diploma Programme in System Operational Science at MIRCE Akademy.
2000: Created and implemented The Master Diploma Programme in System Operational Science at MIRCE Akademy.
1997: 1996: Designed and introduced postgraduate certificate, diploma and Masters of Science course in System Operational Effectiveness, (full/part time) at Exeter University, which is the first course of this kind in Europe;
1996: 1995: Introduced Master of Science course in Reliability and Maintainability, at Exeter University, through the Centre for M.I.R.C.E.;
1996: 1993: Introduced module, Integrated Logistics Support, at Bristol, Bath and West of England University (at postgraduate level), IGDS;
1995: 1993: Introduced module, Reliability & Maintainability, at Bristol, Bath and West of England University (at postgraduate level), IGDS;
1994: 1994: Introduced course Mechanical Reliability, undergraduate level, at Exeter University;
1991: 1991: Designed and introduced Masters course in Logistics Engineering, (part time over three years) at Exeter University, which is the first course of this kind in Europe;
1989: 1988: Planned and introduced course Life cycle engineering, undergraduate level at Exeter University;
1989: 1988: Planned and introduced course Operation and Maintenance, (undergraduate level) at Exeter University;
1983: Introduced Reliability Engineering, at Exeter and Hull University (undergraduate level), and Cranfield Institute of Technology at postgraduate level.
Undergraduate courses at Exeter University:
1994-01: Mechanical Reliability, 50 students, 50 hours;
1990-01: Life Cycle Engineering, 50 students, 50 hrs;
1990-01: Operation and Maintenance, 50 students, 50 hrs;
1988-94: Reliability and Maintenance, 100 students, 50 hrs;
1986-89: Statistics and Probability, 50 students, 10 hrs
1983-89: Reliability of Engineering Systems, 30 students, 30 hrs;
1980-82: Control of Manufacturing Processes, 100 students, 90 hrs;
1979-82: Mechanics and Dynamics, 200 students, 90 hrs;
1979-82: Design of Motor Vehicles, 50 students, 90 hrs.
Postgraduate Courses at other educational institutions:
1995-current 1990 - current System Engineering, BSc Engineering Programme, Jyvaskyla Inst. of Tech., Finland;
1994-2005: 1990-2005 Reliability and Maintainability, MSc in Aerospace Design, Manufacture and Management, IGDS, Universities of Bristol, Bath and West of England.
1994-2005: 1990 - 2005 Integrated Logistics Support, MSc in Aerospace Design, Manufacture and Management, IGDS, Universities of Bristol, Bath, and West of England.
1994-2004: 1992- 2005 Aircraft Maintenance, MSc Aerospace Engineering, IGDS, University of Kingston
1993-99 1995 - 1999 Strategic Leadership and Management of Change, Diploma in Leadership, Centre for Management Studies, University of Exeter,
1992 1991 Diploma course, run by the School of Engineering, Exeter University, for the Libyan engineers working at GMMR project, Systems Engineering (17 students 3 hours), Reliability engineering (17 students, 40 hours out of 60), Maintenance engineering (17 students, 38 hours out of 60),
1991-2001 1994 - 1998 Integrated Logistics Support, MSc in Engineering Management, IGDS, University of Warwick.
1989-95 1991 - 1997 Management of Product Life Cycle, MBA International, Centre for Management Studies, University of Exeter.
1988-95 1992 - 1996 Operation and Reliability in Production, MBA General, Centre for Management Studies, University of Exeter.
1987-90 1990 -1992 Reliability of Engineering Systems, College of Manufacturing, MSc in Production Engineering, Cranfield Institute of Technology, UK.
Master of Science Courses run by the MIRCE Centre at Exeter University:
1996-2000: Functionability Engineering,
1996-2000: Durability Engineering,
1996-2000: Design for Reliability and Maintainability,
1992-2000: Maintainability and Maintenance,
1992-2000: Reliability and Safety Engineering,
1992-2000: Supportability Engineering,
1992-2000: Logistics Integration I,
1992-2000: Logistics Integration II,
1991-2000: Logistics in Life Cycle Engineering,
1991-2000: Mathematics of Logistics,
1991-2000: Tools for Logistics Analysis,
Continuing Education Courses run for Industry from Exeter University
1997 Maintainability Engineering, British Aerospace, Farnborough, 6 students, 24 hours;
1997 Reliability & Maintainability Engineering, GKN Westland, Yeovil, 18 students, 40 hours;
1997 Mathematics for Reliability & Maintainability, Ministry of Defence, Abbey Wood, 20 students, 21 hours;
1997 System Reliability, Reliability Institute, 7 students, 21 hours, Bandung, Indonesia;
1997 Integrated Logistics-System Engineering, 8 students, 24 hours, Jyvaskyla, Finland.
1994 Reliability, Maintainability and Supportability, 128 students, 40 hours, Chung Cheng Institute of Technology, Ta Hsi, Tao Yuan, Taiwan, Republic of China;
1993 Logistics Engineering and Systems Life Cycle, 12 students, 36 hours, Siemens/Plessey, Isle of Wight, UK;
1992 1992 Reliability, Maintainability and Supportability, Exeter University, 54 students, 18 hours;
1991 Mathematics for Logistics Engineers, 15 students, 12 hrs, at British Aerospace, Preston;
1991 Reliability and Maintainability Engineering, 15 students, 12 hrs, at British Aerospace, Salmesbury;
1991 Supportability Engineering, 15 students, 12 hrs, at British Aerospace, Salmesbury;
1991 Reliability Prediction, 2 students,7 hrs, at British Aerospace, Plymouth;
1990 Methods and Tools of Logistics Analysis, 18 students, 15 hrs, at Exeter University;
1990 Overview of Logistics Engineering and Management, ILS/LSA, 30 students, 6 hrs, at Westland Helicopters, Yeovil;
1990 Overview of MIL-STD 1388-1A/2A, 15 students, 6 hrs, at Westland Helicopters, Yeovil;
1989 An Introduction to Logistics Engineering and Management, 15 students, 14 hrs, at Exeter University;
1988 An Introduction to Logistics Engineering and Management, 13 students, 18 hrs, at Exeter University;
1987 Reliability Evaluation of Products, Processes and Services, 12 students, 7 hrs, at Exeter University;
1987 Reliability Based Maintenance, 4 students, 7 hrs, at Exeter University.
Industrial Summer Schools
2007 Analytical and Simulation Methods for the Prediction of Machine In-service Reliability, Cost and Effectiveness, MIRCE Akademy;
2006 Predicting In-service Reliability, Cost and Effectiveness, MIRCE Akademy;
2005 Human-Centred System development, MIRCE Akademy
2004 Applied system Operational Science to Defence Equipment, MIRCE Akademy
2003 Supportability Engineering, MIRCE Akademy
2002 Cost Reduction Through Effective Logistics Engineering & Services, MIRCE Akademy
2001 Systems you can rely on – Tools and Science for 21 century, MIRCE Akademy
2000 Achieving Higher Effectiveness and Total Cost of Ownership, MIRCE Akademy
1999 Analytical Tools & Techniques, MIRCE Akademy
1998 System Operational Effectiveness-Supportability Engineering, Exeter University
1997 System Operational Effectiveness, Exeter University
1998 System Supportability, Exeter University
1995 Maintainability and Maintenance, Exeter University
1994 Life Cycle Cost and Engineering Benefit, Exeter University
1993 Reliability, Maintainability and Supportability, Exeter University
1992 Integrated Logistic Support 1388/2B, Exeter University
1991 Logistics Engineering, Exeter University
1990 Total Logistics, Exeter University
-
· Books
-
· Edited Conference Proceedings
-
· Papers Published in Journals
-
Conference and Symposium Papers
-
· Technical reports
-
· Printed Course Material
Books
1. 1. Knezevic, J., From B2B over A+A, Polly Vacher’s Voyage To The Ice, 2003-04, pp. 80, MIRCE Akademy, System Effectiveness Series, ISBN – 904848-01-X, 2004.
2. Knezevic, J., From B to B, Polly Vacher story, pp. 36, MIRCE Akademy, System Effectiveness Series, ISSN – 1470-9171, 2001.
3. Knezevic, J., From Zero to One, a Nigel Mansell story, pp. 36, MIRCE Akademy, System Effectiveness Series, ISSN – 1470-9171, 2000.
4. Kumar, Crocker, Knezevic, El-Haram, Reliability, Maintenance and Logistic Support- a life cycle approach, pp. 489, Kluwer Academic Publishers, USA, 2000
5. Knezevic, J. System Maintainability, pp.400, Chapman & Hall, London, 1997
6. Knezevic, J, Mantenibilidad, in Spanish, pp.209, Publicaciones de Ingenieria de Sistemas, ISDEFE, Madrid, Spain, 1996
7. Knezevic, J., Mantenimiento, in Spanish, pp.211, Publicaciones de Ingenieria de Sistemas, ISDEFE, Madrid, Spain, 1996
8. Knezevic, J., Probabilistic Elements of Reliability, Maintainability & Supportability, pp.127, Logistics Education Foundation of Society of Logistics Engineers, USA, August 1996
9. Knezevic, J., Reliability, Maintainability and Supportability Engineering - A probabilistic Approach, pp.292, plus software PROBCHAR, McGraw Hill, London, 1992.
10. Knezevic, J., Upravljanje procesima odrzavanja tehnickih sistema na osnovu teorije pouzdanosti, (Control of maintenance processes based on reliability theory), Journal of terotechnology `OMO', pp. 263, October 1988, Belgrade, Yugoslavia.
11. S.Jankovic, Knezevic, J., Z.Pantelic, D.Todorovic., Tehnologija zanimanja za metalostrugare, (Handbook for Machine Tool operators), Zavod za nudzbenike i nastavna sredstva SR Srbije, pp. 396, Belgrade, Yugoslavia, 1981.
12. Knezevic, J., Motori SUS i motorna vozila, (Engines and Motor Vehicles), Zavod za udzbenike i nastavna sredstva, SR Srbija, pp. 182, Belgrade, Yugoslavia, 1979.
Edited Conference Proceedings
1. Knezevic, J., Kumar, D., Nicholas, C., Edited proceedings for 8th International Symposium `Advances in Logistics', University of Exeter, Research Centre M.I.R.C.E, pp.430, Exeter, 1998.
2. Knezevic, J., Edited proceedings for 7th International Symposium `Advances in Logistics', University of Exeter, Research Centre M.I.R.C.E, pp.437, Exeter, 1997.
3. Knezevic, J., Edited proceedings for 6th International Symposium `Advances in Logistics', University of Exeter, Research Centre M.I.R.C.E, pp.274, Exeter, 1996.
4. Knezevic, J., Edited proceedings for 5th International Symposium `Advances in Logistics', University of Exeter, Research Centre M.I.R.C.E, pp.194, Exeter, 1995.
5. Knezevic, J., Edited proceedings for 4th International Symposium ‘Advances in Logistics’, University of Exeter, Research Centre M.I.R.C.E, pp.225, Exeter, 1994.
6. Knezevic, J., Edited proceedings for 10th International Congress of Logistics Engineering, Society of Logistics Engineers, pp.328, Exeter, 1994.
7. Knezevic, J., Edited proceedings for 3rd International Symposium `Advances in Logistics', University of Exeter, Research Centre M.I.R.C.E, pp.237, Exeter, 1993.
8. Knezevic, J., Edited proceedings for 2nd International Symposium `Advances in Logistics', University of Exeter, Research Centre M.I.R.C.E, pp.221, Exeter, 1993.
9. Knezevic, J., Edited proceedings for 1st International Symposium `Advances in Logistics', University of Exeter, Research Centre M.I.R.C.E, pp.278, Exeter, 1992.
List of Papers Published in Journals
1. Knezevic, J., System Operational Science, Distribution Business Management Journal, Vol. 2 No. 3, 2002.
2. Saranga, H., Knezevic, J., Reliability Analysis using multiple relevant condition parameter, International Journal of Quality and Reliability, Volume 6, No. 3, pp. 165-176, 2000, ISSN 1355-2511
3. Knezevic, J., Status odrzavanja u Engleskoj: Pogled na Obrazovanje i Praksu, Maintenance Management ’99, Editorial Papers, pp.177-181, published by DQM Institute, Cacak, Yugoslavia.
4. Knezevic J., Chief Mechanic the New Approach to Aircraft Maintenance by Boeing., , International Journal of Quality and Reliability, Volume 5, No. 4, pp. 314-324, 1999, ISSN 1355-2511
5. Kumar, U.D., Knezevic J., Crocker J., Maintenance free operating period- and alternative measures to MTBF and failure rate for specifying reliability?, the Journal of Reliability Engineering and System Safety, 64 (1999) 127-131, 1999.
6. U Dinesh Kumar, Knezevic, J., Supportability-Critical factor on Operational Availability, International Journal of Quality and Reliability, Volume 15, No. 4, pp. 481-488, 1998
7. Knezevic, J., System Effectiveness, Journal of Communications in Dependability and Quality Management, Vol 1, Nub. 1, pp30-37, 1998, ISSN 1450-7196
8. Kumar, U.D., Knezevic, J., Availability Based Spare Optimisation Using Renewable Process, the Journal of Reliability Engineering and System Safety, 59 (1998) 217-223
9. Knezevic, J., Papic, L., Vasic, B., Sources of Fuzziness in Vehicle Maintenance Management, International Journal of Quality in Maintenance Engineering, pp. 281-288, Volume 3, No.4, 1997, MCB Press, ISBN 1355-2511, UK
10. Knezevic, J., Industry Driven Postgraduate Maintenance Education: M.I.R.C.E. Approach, International Journal of Quality in Maintenance Engineering, pp. 302-308, Volume 3, No.4, 1997, MCB Press, ISBN 1355-2511, UK
11. Kumar, U.D., Knezevic, J., Spare Optimisation Models for Series and Parallel Structures, International Journal of Quality in Maintenance Engineering, Vol III, No. III, pp 177-188, 1997
12. Verma, D., Knezevic J., Development of a Fuzzy Weighted Mechanism for feasibility Assessment of System Reliability During Conceptual Design, International Journal of Fuzzy Sets and Systems, Vol. 83, No. 2, October 1996.
13. Smith, C., Knezevic J., Achieving Quality Through Supportability; II. Mathematical Modelling, International Journal of Quality in Maintenance Engineering, Vol. 2. No. 2. July 1996
14. Knezevic, J., Blanchard, B.S., The System Engineering Process: A Vehicle for Integrating Supportability Requirements into Design, Journal Communications in Reliability, Maintainability, Supportability,, Vol. 3, No 2, pp 38-46, ISSN 1072-3757, July 1996, USA.
15. Verma D., Knezevic J., Application of Fuzzy Logic to Address System Supportability Synthesis and Analysis during Conceptual and Preliminary Design, International Journal Communications in Reliability, Maintainability, Supportability, Vol 3. No. 1., pp 58-64, January 1996.
16. Smith, C., Knezevic J., Achieving Quality Through Supportability; I. Concept and Principles, International Journal of Quality in Maintenance Engineering, Vol. 2. No. 2., pp 21-29, January 1996, UK.
17. Blanchard B.S., Knezevic J., The System Engineering Process - A Vehicle for Integrating Supportability Requirements into Design’, Logistics Spectrum, pp23-30, March 96, USA.
18. Knezevic, J., Basic Theories of Recovery, The Journal of Terotechnology, Yugoslavia, Vol 24, 1995:pp 310-323
19.Blanchard B.S., Knezevic J., The System Engineering Process - A Vehicle for Integrating Supportability Requirements into Design, Logistics Spectrum, Journal of the Society of Logistics Engineers, U.S.A. Vol. 30, Issue 1, March 1996: pp 23-30
20.Knezevic, J., Planning Maintenance Resources for Non-supported Mission, Journal of Quality in Maintenance, Vol. 1 No. 1, 1995: 60-68 MBA Press UK,
21.Savic D.A., Godfrey A. Walters G.A., Knezevic, J., Optimal opportunistic maintenance policy using genetic algorithms, 1: formulation, Journal of Quality in Maintenance Engineering, 1 No. 2 1995:pp 34-49.
22.Savic, D.A., Walters, G.A., Knezevic, J., Optimal opportunistic maintenance policy using genetic algorithms, 2:analysis, Journal of Quality in Maintenance Engineering, 1 No. 3 1995:pp 25-35.
23.Knezevic, J., Reliability Driven Space Logistics Demand, Journal of American Institute of Aeronautics and Astronautics, U.S.A., pp 61-66, Code AIAA-95-0912-CP, February 1995
24.Knezevic, J., Mission Success Driven Space System Sparing Analysis, Journal of American Institute of Aeronautics and Astronautics, U.S.A., pp 54- 60, Code AIAA-95-0911-CP, February 1995
25.Knezevic, J., Logistics Engineering Education Training - The Exeter Experience, International Journal Communications in Reliability, Maintainability, Supportability, Vol. 2, No. 1, January 1995.
26.Knezevic, J., Effective Analysis of Existing Maintainability Data, International Journal Communications in Reliability, Maintainability, Supportability, Vol. 2, No.1, January 1995
27.Knezevic, J., Impact of Correctness of Reliability Analysis on Effectiveness of Logistic Support Analysis, CODERM, News Letter, MOD, U.K. Vol. 12, No. 1, pp 8-9, January 1995.
28.Smith C., Knezevic, J., Supportability Analysis of Optimal Utilisation of Shared Strategic Support Resources, International Journal Communications in Reliability, Maintainability Supportability, SAE International, pp 31-35, Vol. 2, No. 2, July 1995 USA
29.Lynch, T., Knezevic, J., Logistics Development in Europe - UK Perspective, Logistics Spectrum, Journal of the SOLE, USA. Vol 29, Issue 2, 1995, pp 6-9.
30.Knezevic, J., Modelling System Reliability - Way Ahead, CODERM Newsletter, Vol. 12, No. 2, pp 8-9, MOD, UK., June 1995.
31.Knezevic, J., Logistics Engineering Education Training - The Exeter Experience, Logistics Spectrum, pp. 24-29, Autumn 1994., USA.
32.Knezevic, J., Maintainability Prediction at Design Stage, International Journal Communications in Reliability, Maintainability, Supportability, Vol. 1, No. 1. pp. 24-29, 1994, USA.
33.Knezevic, J., Determination of operations/ production downtime for group replacement maintaining policy, International Journal of Operations and Production, Vol 14(7), pp 18-26.1993
34.Pourzanjani, M. M.A., Knezevic, J., Life Cycle Design for Marine Vehicles, Modelling and Control of Marine Craft, edited by M.M.A.Pourzanjani and G.N. Roberts, pp. 75-86, Elsevier Applied Science, London 1990.
35.Walters, G.A., Knezevic, J., Discussion on: Reliability-Based Optimisation Model for Water Distribution, ASCE Journal of Hydraulic Engineering, 115(8), 1157 8, 1989.
36.Flower, J.O., Knezevic, J., Pourzanjani. M.M.A., A New Approach Towards a More Reliable Ship Machinery; Group Replacement Strategy, Ship en Werf, SenW 56STE JAARGANG NR 5, pp 149-52, Mei 1989.
37.Knezevic, J., Condition Parameter Based Approach to Calculation of Reliability Characteristics, Reliability Engineering, Vol. 19, No.1 1987, Elsevier Applied Science.
38.Knezevic, J., Bland, R.J., A practical application of a new method for condition-based maintenance, Journal, Maintenance Management International, Elsevier, Vol.7, No.1, pp.31-37,1987.
39.Knezevic, J., Required reliability level as the optimisation criterion, published in Maintenance Management International, Elsevier, Vol. 6, No.4, March 1987.
40.Knezevic, J., Methodology `EXETER' for selecting an optimal part-replacement policy, Journal, Maintenance Management International, Elsevier, Vol.5, No.3, pp. 209-219, 1985.
41.Knezevic, J., The supplement to methodology `OMO' control (part II), Journal of Terotechnology `OMO', No 7, pp. 414-420, 1984.
42.Knezevic, J., The supplement to methodology `OMO' control (part I), Journal of Terotechnology `OMO', No 6, pp. 333-336, 1984.
43.Knezevic, J., The Algorithms for numerical parameters determination of reliability characteristics, Journal of Terotechnology `OMO', No. 4, pp. 217-222, 1984.
44.Knezevic, J., A Contribution to Analysis of Component Replacement Combined System in Motor Vehicles, TEHNIKA-Engineering No.9, pp.7-1O, 1983.
45.Knezevic, J., PROGNOSTICS as an Element of the Preventive Maintenance Model of a Technical System According to its Technical Condition, Journal of Terotechnology `OMO', No.8, pp.439-444. 1983.
46.Knezevic, J., DIAGNOSTICS as an Element of the Preventive Maintenance Model of Technical System According to its Technical Condition, Journal of Terotechnology `OMO' No.7, pp.395-399, 1983.
47.Knezevic, J., RETROSPECTION as an Element of the Preventive Maintenance Model of Technical System According to its Technical Condition, Journal of Terotechnology `OMO' No.6 pp.328-333, 1983.
48.Knezevic, J., A Contribution to Forming of the Mechanical System Preventive Maintenance According to Technical Condition, Journal of Terotechnology `OMO' pp.255-26O No.5, 1983.
49.Knezevic, J., Technique of Parallel Maintaining Auxilliary Systems of Motor Vehicles, Journal `TEHNIKA-Masinstvo', No.11, pp.7-1O, Belgrade, 1981.
50.Knezevic, J., Programme to Calculate Acceleration of Motor Vehicles, Journal `TEHNIKA-Masinstvo', NO.11, pp. 6-10. Belgrade, 1980.
51.Knezevic, J., A Contribution to Testing Grapho-Analytical Method for Determining Acceleration Time of Passenger Cars, Journal `TEHNIKA Masinstvo', No.10 pp. 10-13, Belgrade, 1978.
List of Conference and Symposium Papers
1. Knezevic, J., Contractor Logistics Support, 13th International Symposium on System Operational Effectiveness, Woodbury, December 2002.
2. Knezevic, J., System Operational Success – Friend or Foe, LSC Symposium on Contractor Logistics Support, Woodbury, UK, November, 2003.
3. Knezevic, J., System Operational Reality, 12th International Symposium on System Operational Effectiveness, Woodbury, December 2002.
4. Knezevic, J., Life Cycle Costing: Aerospace View, London, 2002.
5. Knezevic, J., System Operational Science for Military Logisticians, Proceedings DBM-WoF, 2002 International Conference, Orlando, USA.
6. Knezevic, J., Enhancing Military Logistics Support with Commercial Concepts, Military Logistics Conference, SMI, 24-25 October 2001, London.
7. Knezevic, J., System Effectiveness-Cutting Costs by Improving Efficiency, Third Annual Conference on Supply Chain Management, SMI, 4-5 June, 2001, London
8. Knezevic, J., System Operational Science, Proceedings DBM-WoF, 2001 International Conference, Atlanta, June 2001, USA.
9. Knezevic, J., Using Commercial Concepts to Enhance Your Military Logistics Education and Training, Defence Logistics 2001, February 2001, Brussels
10.Knezevic J., Advanced Education for Capability Enhancement in Supportability and Logistics, Proceedings of the 16th International Logistics Congress, October 2000, Versailles, France.
11.Kumar, D.U., Crocker, J., Knezevic, J., Evolutionary Maintenance for Aircraft Engines, Proceedings of the Annual Reliability and Maintainability Symposium,pp 62-68, 1999.
12.Papic, Lj., Knezevic, J. and Vasic, B., Advanced Concepts of Reliability Accelerated Testing for Decreasing Systems Life Cycle Cost, Proceedings, 7th International Symposium on System Operational Effectiveness, pp 427-437, December 1997, UK
13.Papic, Lj., Knezevic, J., and Vujanovic, N., Reliability Analysis of Computer Systems by FMEA Matrix Method, Proceedings, 7th International Symposium on System Operational Effectiveness, pp 320-330, December 1997, UK
14.Verma, D., T. Herald, and Knezevic, J., Integration of Supportability Considerations into the System Engineering Process Through Focused Modelling and Simulation, 2nd. Modelling, Simulation, and Virtual Prototyping Conference, pp 297-305, Arlington, Virginia, USA, November 1997.
15.Smith, C., Knezevic, J., Supportability Analysis of Repairable Systems with Parallel Configurations, Technical Proceedings, The 32nd Annual Logistics Conference, pp 366-380, August 1997, USA
16.Knezevic, J., Supportability Engineering & Systems Effectiveness, Technical Proceedings, The 32nd Annual Logistics Conference, pp 392-405, August 1997, USA
17.Knezevic J., Impact of Logistics Support on System Effectiveness, Proceedings, Integrated Logistics Support - Practical Experience & Policy, pp 1-10, DSRD Association, June 1997, UK
18.Knezevic, J., Logistics, Industrial Reliability & Cost Effectiveness, Proceedings, The Eighth NATO Symposium of Codification, May 1997, USA
19.Knezevic, J., Reliability, Maintainability, Supportability, Key Requirements for Systems Automation, Proceedings, International Conference on Innovative Technologies, pp 365-376, Design, Build and Manufacture Association, March 1997, USA
20.Kumar, D., Jain, R.K., & Knezevic, J., Optimal Maintenance Policies for r-out-of-n: G Systems, Proceedings of the 6th International M.I.R.C.E. Symposium, pp 153-164, 1996, UK.
21.Knezevic, J., Papic, Lj., Aronov, J., Advance Approaches to Reliability and Safety Assurance of Complex Systems Based on FMECA Method, Proceedings of the 6th International M.I.R.C.E. Symposium, pp 58-75, 1996, UK.
22.Knezevic, J., Odoom, E.R., Operational Reliability Improvement of Ships, Proceedings of the 6th International M.I.R.C.E. Symposium, pp 76-90, 1996, UK.
23.Knezevic., Logistics Support Analysis-Today and Tomorrow, ILCE-96, Proceedings pp 114-126, October , Paris, France.
24.Knezevic, J., Verma, D., System Supportability Issues and Concerns in a Rapidly Evolving Technology Environment, Proceedings SOLE 12th International Logistics Congress, pp181-189, September 1996, Athens, Greece.
25.Verma, D., Knezevic, J., Development of a Fuzzy Requirements Matrix to Support Conceptual System Design, Proceedings SOLE 12th International Logistics Congress, pp 339-345, September 1996, Athens, Greece.
26.Smith C., Knezevic J., Supportability Analysis of Shared Strategic Resources, 30th SOLE International Symposium, pp 119-130, Washington, DC, August 1996.
27.Knezevic, J., Durability Driven Logistics Demand Analysis, Proceedings 30 SOLE International Symposium, pp. 141-150, Washington DC, August 1996.
28.Knezevic, J., Industry Driven Maintenance Education: An Academic Challenge, Proceedings ICOM-96, paper 56, pp 1-5, May 96, Melbourne, Australia.
29.Knezevic, J., Integrated Replacement Analysis for Reduction of Maintenance and Support Cost, Proceedings ICOM-96, paper 25, pp1-6, May 96, Melbourne, Australia.
30.Knezevic, J. Supportability Analysis: Today and Tomorrow, MOD Science Conference, Oxford, March 1996.
31.Knezevic, J., Inherent and Avoidable Ambiguities in Data Analysis, SRD Assoc. Member's Technical Symposium, ``Data, Information Decision Making'', pp 31,39, AEA Conference, Risley, U.K., 28th February 1996.
32.Knezevic, J., System Sparing Analysis Based on Mission Success, Proceedings 3rd Annual Technical Conference-Florida Log’96, pp 1-8, February 1996, Orlando, USA.
33.Knezevic, J., El Haram, M., Indicator and Predicator as Two Distinct Condition Monitoring Parameters, Proceedings Advances in Logistics - Fifth International Symposium, pp 179-186, December 1995, Exeter, UK.
34.Knezevic, J., El Haram, M., Predictor Based Maintenance Methodology, Proceedings Advances in Logistics - Fifth International Symposium, pp 187-194, December 1995, Exeter, UK.
35.Knezevic, J., Applied Probability Theory and Equipment Failure, Proceedings of The International Conference on Total Logistics, Bello Horizonte, Brazil, 11-14th December 1995
36.Knezevic, J., Integrated Replacement Analysis for Reduction of maintenance and Support Cost, International Conference on Maintenance of Engineering Facilities in Developing Countries, Botswana, Africa, October 1995.
37.Knezevic, J., Industry Driven Maintenance Education: An Academic Challenge, International Conference on Maintenance of Engineering Facilities in Developing Countries, Botswana, Africa, October 1995.
38.Jiggins J., Knezevic, J., Fuzzy Logic - A Possible LSA Tool, 31st International Symposium Logistics Engineering, pp 151-171, San Antonio, USA, August 1995.
39.Knezevic, J., Reduction of Support Cost Through Group Replacement of Independent LRU's, 31st International Symposium Logistics Engineering, pp 73-79, San Antonio, USA, August 1995.
40.Nicholas, C., Knezevic, J., Availability: Cost-Benefit Analysis, Proceedings of the European Safety Reliability Conference - ESREL '95, Bournemouth, pp 165-173, June 26-28 1995.
41.Blanchard, J. Knezevic, J., The System Engineering Process, Vehicle for Integrated Logistics Requirements into Design, Proceedings of the 11th International Logistics Congress, pp 1-12, Sweden, June 1995.
42.Knezevic, J., Impact of Reliability on Effectiveness of LSA, Proceedings of the 11th International Logistics Congress, pp 1-12, Sweden, June 1995.
43.Knezevic, J., Mission Success Driven Space System Spare Analysis, Proceedings 6th Space Logistics Symposium, pp-54-60, code AIAA-95-0911 February 1995, Houston, USA.
44.Knezevic, J., Reliability Driven Space Logistics Demand Analysis, Proceedings 6th Space Logistics Symposium, pp-61-66, code AIAA-95-0912, February 1995, Houston, USA.
45.Knezevic, J., PROBCHAR II - Software and Science, Proc. Advances in Logistics Symposium, pp. 50-60, Exeter, December 1994.
46.Smith, C., Knezevic, J., The Effect of Availability of Shared Strategic Resources on System Availability, Proc. Advances in Logistics Symposium, pp.111-127, Exeter, December 1994.
47.Knezevic, J., El-Haram, M., Practical Application of the Condition-Based Approach to Monitoring Particle Size Distribution, Proc. of COMADEM'94, pp. 162-168, New Delhi, September 1994.
48.Knezevic, J., Extracting More Information from Empirical Maintainability Data, 29th Annual International Logistics Symposium, Proc. pp.108-112, Anaheim, California, August 1994.
49.Knezevic, J., Hazard Function Driven Readiness Based Sparing for One-for-One Inventory Policy, 2nd Annual NAVSEA/NAVSUP International Logistics Symposium, Proc. pp 373-377, May 31 - June 3 1994.
50.Knezevic, J., Lee, S., Application of Object-Oriented Systems Analysis (OSA) in Logistics Engineering, 10th International Logistics Congress, Proc. pp.321-334, Exeter, U.K., March 1994.
51.Verma, D., Knezevic, J., Conceptual System Design Evaluation: Handling the Uncertainty, 10th International Logistics Congress, Proc. pp. 118-131, Exeter, U.K., March 1994.
52.Hunt, S., Knezevic, J., Linear Programming Based Maintainability Allocation, 10th International Logistics Congress, Proc. pp. 142-151, Exeter, U.K., March 1994.
53.El-Harem, M., Knezevic, J., New Developments in Condition Based Approach to Reliability, 10th International Logistics Congress, Proc. pp. 163-169, Exeter, U.K., March 1994.
54.Smith, C., Knezevic, J., Optimal Utilisation of Shared Strategic Support Resources with Distributed Repair Time, 10th International Logistics Congress, Proc. pp. 221-231, Exeter, U.K., March 1994.
55.Knezevic, J., Concurrent Engineering, an Educational and Professional Challenge, ILCE'94 Conference, Proc. pp. 325-330, Montpelier, February 1994.
56.Verma, D., Knezevic, J., Application of Fuzzy Logic in the Assurance Sciences, Proc. Reliability Maintainability Symposium, pp. 436-439, Los Angeles, January 1994.
57.Smith, C., Knezevic, J., Optimal Utilisation of Shared Strategic Support Resources, with Constant Repair Time, Proc. Advances in Logistics International Symposium, pp. 113-121, Exeter, December 1993.
58.Knezevic, J., Extracting More Information From Existing Empirical Reliability Data, Proc. Advances in Logistics Symposium, pp.61-68, Exeter, December 1993.
59.Knezevic, J., Industry Driven Logistics Education: An Academic Challenge, 2nd National Conference on Science Technology of National Defence, Proc. pp. 347-350, Taiwan, November 1993.
60.Knezevic, J., Method for Maintainability Analysis in Concurrent Engineering Environment, Proc. SOLE 28th Annual International Logistics Symposium, pp. 158-164, Colorado Springs, August 1993.
61.Knezevic, J., .Dou D., Failure Distribution Approach to Spare Modelling, Proc. SoLE 28th Annual International Logistics Symposium, pp. 363-369, August 1993.
62.Knezevic, J., Dou, D., Principles of Time-Dependent Availability, Proc. Advances in Logistics International Symposium, pp. E1-9, Exeter, July 1993.
63.Knezevic, J., Dou, D., Initial/Mission Sparing based on Time-Dependent Availability, Proc. Advances in Logistics International Symposium, pp. E2-10, Exeter, July 1993.
64.Knezevic, J., Outline of Failure Distribution Approach to Logistic Support Analysis, Proc. 5th Space Logistics Symposium, pp. C4-C21, Huntsville, May 1993.
65.Knezevic, J., Application of Time-Dependent Availability to Initial Spares, Proc. 5th Space Logistics Symposium, pp. B4-B11, Huntsville, Alabama, May 1993.
66.Knezevic, J., Reliability Modelling under Non-Constant Failure Rate, Proc. International Conference on Industrial Logistics, Paper 6.3, France, July 1993
67.Knezevic, J., Dou, D., Sparing for Successful Off-Shore Mission, Proc. ASNE Logistics Symposium, Seattle, U.S.A., 17-18 March 1993.
68.Knezevic, J., Maintainability Prediction - Fast Track Calculation, Proc. 26th International Logistics Conference, pp. 167-172, Indianapolis, August 1992.
69.Knezevic, J., Exeter Approach to Logistics Education and Training, Proc. Advances in Logistics International Symposium, pp. 1-10, Centre for MIRCE, Exeter University, July 1992.
70.Knezevic, J., Dou, S., Lee. S., Application of Dynamic Programming to Spares Modelling, Proc. Advances in Logistics International Symposium, Centre for MIRCE, pp. 11-26, Exeter University, Exeter, July 1992.
71.Knezevic, J., Lee, S., The Effect of Improving Availability in the Concurrent Engineering Environment, CE CALS, Washington '92 Conference/Exposition, pp. 375-386, Washington, June 1992.
72.Knezevic, J., Dou, D., Time-Dependent Availability, Proc. 8th International Logistics Congress, pp. 1-10, Madrid, April 1992, Spain.
73.Knezevic, J., Nicholas, C., New Horizons in UK Logistics Education - A Modular Approach to Life Cycle Engineering, Proc. 8th International Logistics Congress, 10 pages, Madrid, April 1992, Spain.
74.Pourzanjani, M., Knezevic, J., Life Cycle Design for Marine Vehicles, Proc. of Ship Production Symposium, San Diego, 1991.
75.Knezevic, J., Accuracy of Reliability and Maintainability Modelling for Subsystems and Systems, Reliability 91, International Conference on Reliability, Proc. pp. 499-505, edited by R.H.Matthews, Elsevier Applied Science, London, June 1991.
76.Knezevic, J., Measures of Logistics and International Competition, Proc. 7th International Logistics Congress, pp. 123-136, Society of Logistics Engineers, Paris, April, 1991.
77.Knezevic, J., Reliability Modelling of the Systems Whose Components Have Non-Constant Failure Rate, Space Product Assurance for Europe in the 1990s, European Space Agency, Proc. of ESA Symposium, pp. 249-253, Nordwijk, Holland, April 1991.
78.Knezevic, J., Accurate Assessment of Reliability and Maintainability Characteristics, Conference on Rotorcraft Reliability and Maintainability - Future Design Requirements, pp. 7-12, The Royal Aeronautical Society, London, March, 1991.
79.Knezevic, J., Dou, D., and Lee S., Determination of Initial Spare Requirements, Proc. Operational Research Conference, University of Salford, December 1991.
80.Swan, D., Walters, G.A., Knezevic, J., The Influence of Load Diversity on Gas Network Design, International Conference, Budapest, Hungary, October, 1990.
81.Knezevic, J., Logistics Today: Mean Value, Logistics in Future: Entire Distributions, Proc. 25th International Symposium, pp. 163-167, Phoenix, USA, August, 1990.
82.Knezevic, J., Efficiency Enhancement by `EXETER' Approach to ILS, Proc.6th International Logistics Congress, pp. 203-215, Montreal, Canada, April 1990.
83.Knezevic, J., Preliminary Study of Life Cycle Design of Motor Vehicle, Proc. XIII International Conference on Science and Motor Vehicles, September 1989, Belgrade, Yugoslavia.
84.Barros, L., Knezevic, J., Least Cost Support Policy With Design Interdependencies and Fixed Charges, Proc. 5th International Congress of The Society of Logistics Engineers, pp. 178-185, April 5-6, 1989, London, UK.
85.Knezevic, J., Real-Time Operational Reliability, Proc. Sixth Euro Data Conference, edited by V.Colombari, pp 710-715, Springer-Verlag, March 14- 16, 1989, Sienna, Italy.
86.Flower, J.O. Knezevic, J., Pourzanjani, M.M.A., A New Approach Towards a More Reliable Ship Machinery; Group Replacement Strategy', Proc. of the NAV'88-WEMT'88 Symposium on Advances in Ship Operations, 12-14 October 1988, Trieste, Italy.
87.Knezevic, J., Inspection and Examination Two Different Condition Monitoring Activities, Proc. of the 1st Seminar on `Condition Monitoring and Diagnostics Engineering Management', 19-21 September 1988, Birmingham.
88.Knezevic, J., Walters, G.A., Group Replacement of Components Within the Same Subnetwork, Proc. Symposium on Reliability-Based Design in Civil Engineering, Lausanne, July, 1988.
89.Walters, G.A., Knezevic, J., The Influence of Reliability on the Layout and Design of Water Distribution Networks, Proc. Symposium on Reliability-Based Design in Civil Engineering, Lausanne, July, 1988
90.Knezevic, J., On the Application of a Condition Parameter Based Reliability Approach to Automobile Maintenance, Proc. 4th International Conference on Automobile Reliability, Prague, June 1988.
91.Knezevic, J., Henshall, L.,I Subjected to Creep Cracking Using a Condition Parameter Based Reliability Approach, Proc. of the Conference `Materials and Engineering Design', London, 9-13 May 1988.
92.Knezevic, J., Calculation of Reliability Characteristics in the Case of Corrosion Using the RCP-based Approach, Proc. 10th Advances in Reliability Technology Symposium, NCSR, University of Bradford and UMIST, Bradford, 6-8 April, 1988.
93.Knezevic, J., Description of Continuous Change in Condition of Engineering Systems by Relevant Condition Parameter, Proceedings International Symposium on `Risk Analysis in Environmental Impact Assessment', Milan, Italy, November 1987.
94.Knezevic, J., Dynamic Control of Maintenance Providing Required Reliability with Extending Operating Life, Proceedings 4th International Maintenance Conference, Cincinnati, USA, September 1987.
95.Knezevic, J., Reduction of Maintenance Cost by Group Replacement of Components from the Same Level of Access, Proceedings IX International Conference on Production Research, Cincinnati, USA, August 1987.
96.Knezevic, J., On the Application of a Condition Parameter Based Reliability Approach to Pipeline System Maintenance, Proc. 2nd International Conference on Pipes, Pipelines and Pipe Line Systems, Utrecht, Holland, June 1987.
97.Brookes, C.A.,. Bland, R.J., Belmont, M., Knezevic, J., I Dynamic Control of Maintenance Processes for Electric Vehicle Components, Proceedings of XXI FISITA Congress, June, 1986, Belgrade, Yugoslavia.
98.Knezevic, J., Required reliability level as the optimisation criterion, Proceedings of 9th Advances in Reliability Technology Symposium, Bradford, 1986, England, also published in Maintenance Management International, Elsevier, Vol. 6, No.4, March 1987.
99.Knezevic, J., Some Possibilities for Monitoring the Technical Condition of Engineering Systems, Proc. Scientific Congress :Industrial Systems -IS '84, Novi Sad, 1984.
100.Knezevic, J., Diagnostics and Inspection as two Different Processes, Proc. Scientific Congress: Maintenance '84, Cetinje (YU), 1984.
101.Knezevic, J., A Contribution to Analysis of Component Replacement Combined System in Motor Vehicles, TEHNIKA-Engineering No.9, pp.7-1O, 1983.
102.Knezevic, J., PROGNOSTICS as an Element of the Preventive Maintenance Model of a Technical System According to its Technical Condition, Journal of Terotechnology `OMO', No.8, pp.439-444. 1983.
103.Knezevic, J., Basic Recommendations for Forming a System for Operating a Restoring Process of Motor Vehicles, Proc. Scientific Congress: Science and Motor Vehicles, Opatija, 1983.
104.Knezevic, J., A Contribution to the Analysis of a Vehicle Part Replacement System, Proc. Scientific Congress: Engines and Motor Vehicles, Kragujevac (Yu.), 1982.
105.Knezevic, J., Analysis of a Bus Hydro-mechanical Transmission Reliability, Proc. 4th Symposium of Transmission, Belgrade, 1982.
106.Knezevic, J., Methods for the Determination of the Characteristics of the Process of Renewal, Proc. 9th Congress of SYN OP IS, pp.199-211, Herceg Novi, Yugoslavia, 1982.
107.Knezevic, J., Testing Grapho-Analytical Method for Determination Acceleration Time of Passenger Cars, Proc. Scientific Congress : Engines and Motor Vehicles, Kragujevac, Yugoslavia, 1981.
Technical Reports
|
1997MRR017 |
Bewsher, J., Knezevic, J., An Initial Study in the Identification of an Artificial Intelligence Approach to Determine Appropriate Support Chains for Royal Air Force Equipment |
|
|
1997MRR022 |
Hossack, S., Knezevic, J., Merlin Storage Considerations on Type 23 Frigates |
|
|
1997MRR026 |
Pironet, G., Knezevic, J., Applicability of Fuzzy Set Theory in Logistics Factories, Re-location Problem |
|
|
1997MRR028 |
Robinson, K., Knezevic, J., Proposed Procedure for the Transportation of Operational Feedback Data for the EH101 |
|
|
1997MRR030 |
Vig, S., Knezevic, J., A Basis for a Company Management Procedures on Tot-age |
|
|
1997MRR033 |
David Chant, D., Knezevic, J., Motor Vehicle Ergonomic Design for the Modern Motorist |
|
|
1997MRR035 |
Gruenloh, E., Knezevic, J., NSSN Sonar System First Tier Sub-assembly (FTS) Design Trade-Offs |
|
|
1997MRR036 |
Hardy, S., Knezevic, J., Ergonomic Design of a Mobile Support Facility for the Maintenance of Ejection Seats |
|
|
1997MRR045 |
Turner, M., Knezevic, J., Effects on Maintainability when Considering Maintenance Tasks in a Nuclear, Biological or Chemical (NBC) Environment |
|
|
1996MRR025 |
Bewsher, J., Knezevic, J., Human Factors in the Procurement and Provisioning of Royal Air Force Consumable Items |
|
|
1996MRR030 |
Hossack, S., Knezevic, J., Human Factors Standard for Yarrow Shipbuilders |
|
|
1996MRR034 |
Pironet, G., Knezevic, J., Applicability of Fuzzy Set Theory in Human Factors - An Adaptation for Staff Selection Process |
|
|
1996MRR036 |
Robinson, K., Knezevic, J., The Study of Digital Mock-ups in Short Brothers |
|
|
1996MRR038 |
Vig, S., Knezevic, J., A Maintainability Demonstration Procedure to Verify the Mean Time to Repair |
|
|
1996MRR001 |
Cruickshank, J., Knezevic, J., Implementing Initial Provisioning into the 21st Century within the European Military Aerospace Industry |
|
|
1996MRR009 |
Brain, P., Knezevic, J., Controlling Rotor Induced Airframe Vibration as an aid to Helicopter Availability, Serviceability and Reduced Life Cycle Costs |
|
|
1996MRR010 |
Carpenter, A., Knezevic, J., Issues in EDI and Electronic Trading |
|
|
1996MRR011 |
Chorley, E., Knezevic, J., The Value of Field Data and its use in Determining Critical Logistic Support Resources (A Case Study) |
|
|
1996MRR012 |
Clouth, P., Knezevic, J., The Economic Evaluation of Logistic Engineering Scenarios |
|
|
1996MRR013 |
Crocker, J., Knezevic, J., Weibull Parameter Estimation - A Comparison of Methods |
|
|
1996MRR015 |
Delaney, R., Knezevic, J., Sortie Generation Rate - A Meaningful MoE? |
|
|
1996MRR016 |
Hillman, H., Knezevic, J., The Impact of a Less Sophisticated Bite and Diagnostics on System Phase - in Maintainability and Supportability A Trade Off Study |
|
|
1996MRR017 |
Marshall, F., Knezevic, J., Design of Built-in Test for Electronic Equipment : Expert Knowledge and Indecision |
|
|
1996MRR018 |
Marshall, N., Knezevic, J., In-Country Bonded Stores |
|
|
1996MRR020 |
McMillian, N., Knezevic, J., Development, Application and Potential of Artificial Intelligence to RAF Logistics Decision |
|
|
1996MRR021 |
Nicholson, A., Knezevic, J., Assessment of the Accuracy of Engineering Judgement, when used on a Headlamp and Bulb of an Off Road Vehicle and its Consideration as a Form of Subjective Probability |
|
|
1996MRR022 |
Rygalski, S., Knezevic, J., An Investigation into the Relationships Between Corrective, Preventive and Opportunistic Maintenance and the Potential Benefits from their Performance |
|
|
1996MRR023 |
Watson, I., Knezevic, J., System Maintainability Information Systems |
|
|
1995MRR001 |
Cruickshank, J., Knezevic, J., Optimised Sampling for Estimating the Reliability of a Series System
|
|
|
1995MRR002 |
Denby, F., Knezevic, J., The Allocation of Shared Support Resources During Level of Repair Analysis (LORA) |
|
|
1995MRR003 |
Doyle, P., Knezevic, J., Applying FMECA to Manufacturing Processes |
|
|
1995MRR004 |
Fripp, J., Knezevic, J., Quantifying Supportability - A Practical Approach |
|
|
1995MRR005 |
Kneepkens, J., Knezevic, J., Availability within Different Types of Systems |
|
|
1995MRR006 |
||